H2.2 Flip-Top FPC Connectors

SPECIFICATION
Rated Current :0.5A
Contact Resistance :30mQMax
Insulation Resistance :500MQMin
Withstand Voltage :500V AC/DC
Operation Temperature  :-40°c to +105c
material：
Housing:High-temperature material
Terminal:Copper alloy 

The Fpc Connector (Flexible Printed Circuit Connector) is a flexible printed circuit board connector that connects circuit boards in electronic equipment. Compared with other types of connectors, FPC connectors have the advantages of simple structure, high reliability, low contact resistance, small size, light weight and easy installation, and are therefore widely used in various electronic devices.FPC Connector

FPC connectors work by transmitting signals and power through copper foil covered with a flexible base film. fpc connectors usually consist of pins, sockets, snaps and latches. It can connect different shapes of circuit boards, such as flexible circuit boards, rigid circuit boards, metal circuit boards, etc. In electronic equipment, FPC connectors are often used to connect monitors, touch screens, hard disk drives, keyboards, cameras, LED strips, etc.Female Header Connector

When using FPC connectors, the following points need to be noted:

1. Installation method: The correct method should be used when installing the FPC connector to ensure good contact of the connector. The correct assembly method can ensure the mechanical strength and electrical properties of the connector, as well as prevent damage and dislodgement of the connector.FFC Connector

2. Anti-static: Static electricity may cause damage to the FPC connector, so attention should be paid to anti-static when using. You can prevent electrostatic damage through proper grounding methods and the use of electrostatic protection devices.

3. Environmental protection: FPC connectors should avoid contact with water, oil and other chemicals. Special care should be taken to avoid contact with these substances during installation and use.

4. Temperature range: The operating temperature of FPC connectors is normally -55°C to +85°C. If this temperature range is exceeded, the FPC connector should be protected from the effects of the temperature. If this temperature range is exceeded, the FPC connector may fail or be damaged.

FPC connectors are a very common type of electronic connector with many excellent properties and advantages. In electronic equipment, FPC connectors can be installed in the right way and used in the right way to ensure their performance and service life.