Home / TechnologyPrecision connectorsPin and female plugging force test points
2022-12-20
In the field of electronic components industry, often involves the product plugging force test work, then the electronic connector, the row of pins and females plugging force test points are what? From a professional point of view to give you an introduction to give you an in-depth understanding of the electronic connectors in the row of pins and females plugging force test points are what.
Connector pin and female plugging force test points
A, the test points.
1, the test object for the entire connector, (focusing on the plug contact points)
2, test the role of the axis for the normal use of the connector direction (the opposite direction of the terminal assembly.
3, unless otherwise specified, the speed of 25.4mm/minute
4, for destructive testing.
Second, the specification requirements.
1.General set the minimum value (4.9N Min.).
2, the definition of terminal retention force is to ensure that the terminal (conductor) fixed in the plastic, has been assembled in the plastic terminals in the cracking process (such as welding / product handling process of pulling / SMT process) and the use of the process (such as the male and female pair plugging process.
3, row of pins and row of female processing by vibration and street impact) will receive external force, so the terminal and plastic holding force must be sufficient, will not make the terminal in the unexpected force after the return of the PIN, resulting in interruption of the connection, the connection function failure.
